Description
Product available for pickup at Collingwood Store
Please Note: The base is die cut and to reduce waste base colour can vary and can’t be selected.
Ability Level:
Advanced-Expert
Terrain:
All Mountain
Rocker Profile:
Camrock 2.4.2
Camber is the base of snowboarding: you need to have an edge hold long enough to drive in and out of turns, the Camber acts as a shock absorber on cars they push the wheels into the road to enhance grip. The camber does exactly that to the edge. Allowing you to drive your turns longer and release later.
Flex:
8 – (1 Soft – 10 Stiff)
Core:
Poplar, Paulownia
Carbon PowerDrive 2.0 – Evolving over the years, the PowerDrive core is always about maximizing the power and energy of any given shape. The Optimistic begins with the same light, snappy Poplar and Bamboo core featured on the Standard and Ghost. Yes. then mills two custom programmed channels about 30mm in from the edge, running parallel to and matching the sidecut dimensions. Inserted into these channels are pre-bent bamboo stringers wrapped in carbon. The end result is a highly responsive core that precisely matches and compliments the outline of each board. From intuitive turn initiation, solid edge hold and explosive release, the PowerDrive core is constantly active.
Glass:
Biax Robust torsional flex.
Base:
Sintered Spec
Pellets or course powder is pressed until it forms a solid. There are several suppliers for our entire industry and they each have different codes for them, depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions.
Shape:
Directional
UnderBite : Better edge hold and easier turns. Redistributing rider weight and input power, UnderBite enhances turning ease and edge hold. By having the edge pulled in a couple of millimetres at the binding area acts like a gas pedal or a serrated knife, enhancing the cutting power of the edge. While you are turning on hard packed snow you need an insertion point to ease the edge. Then you need the edge to drive. We only have a couple inlays because once you’ve engaged your edge you are driving your turn. UnderBite allows you to have that extra leverage to apply power to the edge where you want to. From nose to tail you have a better edge control and a smoother drive.
Binding Mount Pattern:
2 x 4 Insert Pack
Warranty:
Limited Lifetime
